Model NO.: LSR Material: Superfine Fiber Color: White Shape: Dust Mask Six Types: Neonate, Infant, Pediatric, Adult etc Application: Valve Materials Standard: Medical Grade Design Type: Can Be Customized Working Temperature: -20c~450c Specification: CE, ROHS, FDA HS Code: 3926901000 Mask Application: Medical Protective Mask Certification: SGS Mask Type: Safe-Type Size: 0#,1#,2#,3#,4#,5# Hardness: 15 Shore a -90 Shore a Materials: LSR Colors: Translucent OEM&ODM: Highly Welcome Trademark: Better Origin: Xiamen, China Liquid Silicone Medical Laryngeal Mask, LSR Laryngeal Mask for Medical Use
LSR Masks are made of medical grade liquid silicone because this is generally
considered the material of choice for its superior ability to conform to the patient's facial anatomy. The field of application for the LSR Masks includes anesthesia and mask
ventilation for pediatric and adult patients.
LSR Masks are available in various shapes and sizes. The smaller sizes have a rather
round shape in order to provide comfortable fit and effective seal for the faces of infants. The bigger sizes have an anatomically formed teardrop shape to ensure convenient fit and seal for facial contours of adult patients.
LSR Masks have a flexible, soft and transparent mask body. The LSR Mask
bodydesign provides a comfortable grip. Shape and material allow for safe handling by doctors and nurses. The liquid silicone masks are reusable.
Crystal clear dome
for easy observation of the patient's condition
Dome with thumb rest and soft, shaped, airfilled cuff
allows a tight fit to the patient's face with an easy grip
Complete line with 6 different sizes
Neonate(0#), Infant(1#), Pediatric(2#), Adult(3-5#)
Proper size available for all patients
Supplied with hook ring
(except neonate and infant sizes) the mask is prepared for fastening by head strap. Hook ring can easily be removed if not needed
Disposable/single patient use
The combination of lower cost disposable materials and the single patient use concept, offers minimized risk of cross infection
without need for establishing and maintaining resource consuming cleaning, disinfecting and sterilizing procedure
Mask dome and cushion are made of LSR.
All sizes are delivered individually packed, non-sterile, in packs of 20 units
1.Transparent mask shell is convenient for observation in the mask vomit, bloodstained, natural breathing in patients
2.Mask joint is the standard diameter 22/15 mm (conform to standard: ISO5356-1).
3.The mask is made of liquid silicone rubber(LSR) material, conform to the requirements
of the ISO10993 medical biological evaluation.
4.This product conform to the requirements of the eu MDD/directive 93/42 / EEC.
|Product ||Cat.No. ||Speccification ||Description |
|Anesthesia Mask ||5401100 ||Neonate(0#) ||15mmOD, Non-inflatable |
|5401110 ||Infant (1#) ||15mmOD, inflatable |
|5401120 ||Child (2#) ||22mmID, inflatable |
|5401130 ||Small Adult (3#) ||22mmID, inflatable |
|5401140 ||Medium Aduit (4#) ||22mmID, inflatable |
|5401150 ||Large Adult (5#) ||22mmID, inflatable |
Process The LSR Molding
process starts with proper part design. Anyone familiar with designing parts for injection molding should find designing an LSR part to be similar. However, the shrink rate on LSR is fairly high, and the material also tends to flash very easily during molding. Protomold helps mitigate challenges related to high shrink rates by planning appropriate tolerances and incorporating additional features into the mold design to help reduce flash. LSR typically fills thin wall sections with minimal challenges and is accommodating to variations in wall sections as sink is almost nonexistent.
Mold production When an order is placed, Proto Labs will then design an LSR molding tool. Due to the flexible nature of LSR, parts are manually removed from the mold, and thus, ejector pins are not built into the mold design. Like a standard Protomold aluminum tool, an LSR molding tool is fabricated using a combination of CNC milling and CNC electrical-discharge machining (EDM) to create a high-temperature aluminum tool built to withstand the LSR molding process. After milling, the tool is polished by hand to customer specifications, which allows six standard surface finish options: PM-F0, PM-F1, SP-C1, PM-T1, PM-T2 or SPI-A2. Others may be available by request.
Part production The finished tool is loaded into an advanced LSR-specific injection-molding press that is precision geared for accurate control of shot size to produce the most consistent liquid silicone rubber parts. LSR molding shares many similarities with conventional injection molding, but there are a few notable differences. Unlike thermoplastic resin, which is melted before injection, LSR is a two-part thermoset compound that is chilled before being injected into a heated mold and ultimately cured into a final part. Note that Protomold uses an automated meter mixing pump to assure the exact combination of the two-part compound; nothing is hand mixed. Since LSR is a thermosetting polymer, its molded state is permanent - once it is set, it can't be melted again like a thermoplastic.
Liquid silicone rubber is a free-flowing, shear thinning thermoset material that injects easily into a mold and is less prone to many defects like sink as compared to typical thermoplastic materials. However, LSR flashes extremely easily and into gaps as small as 0.0002 in. When designing a part for LSR, you should keep in mind best practices for tooling of standard plastic molds. Though the materials are different, the molds are constructed in a similar fashion.
1) Liquid silicone medical part, as like the capsule, laryngeal mask capsule, oxygen mask, protective mast, catheter, balloon, medical belt etc.
2) Liquid silicone auto parts, Silicone Valve
, O-ring, sealing part.
3) Liquid silicone electronics and industrial product, such as the watchband, mobile Phone Case
4) LSR products, which can be with the insert, as like the plastic part, steel part etc. As sample: silicone diving mask, electric silicone drum Stick, silicone handle, silicone vibrators etc.
How to distinguish liquid silicone rubber and solid silicone rubber :
Silicone rubber can be divided into two types according to the form of existence, liquid silicone rubber and solid silicone rubber.
Because of different forms of existence, they have distinct physical performances, which also results in significant differences in application. This article will discuss the differences between the liquid silicone rubber and solid silicone rubber.
1.Vulcanized silicone rubber products and mixed silicone rubber are solid.
1)The solid silicone rubber we mention here is mixed silicone rubber, which is also known as high-temperature silicone rubber.
2)This kind of silicone rubber can only be completely vulcanized in high temperature no matter which kinds of vulcanizing agent is used in order to get the ideal physical performance.
3)Solid silicone rubber can be made into all kinds of silicone products after vulcanization, which generally have good physical properties. Solid
4)Silicone rubber can reach food grade standard by FDA approval after two-times vulcanization process.
5)Thus, solid silicone rubber can be applied in both industry and foodstuff.
2.LSR has more variety, and it is liquid because it is made of original organic silicone material.
1)Owing to the sulfur of movement, LSR is easier to form, so it can be easily made into mould used to copy product, which is what solid silicone rubber unable to meet.
2)Moreover, it can also be made into adhesive being adhered to a variety of materials.
3)The majority of LSR can be vulcanized at room temperature.
4)LSR can be divided into condensed type and addition type according to the reaction types.
The former generally can not reach the food grade standard while the latter can do.
Therefore, addition type LSR is used in all walks of life because of its very good physical properties.
1. Precision Mold-Making Technology (Since 1998)
2. Competitive Price: Origin Manufacturer.
3. Five experienced designers: offer technology/production/design/artwork support etc.
4. Production and Test strictly according to ISO9001.
5. Complete Production Plant, Equipment, Environment
1. Five Plants: Mold-Making, Silicone Rubber Compressive, Plastic Injection, LSR
Injection, and Assembly Plants.
2. MoldMaking Equipment: CNC, Mirror EDM, EDM, Slowspeed Wire Cut M/C and Other
auxiliary equipment etc.
3. Production Equipment: 15 Sets Rubber Compressive Machines, 8 Sets Haitian Plastic Injection Machines, 2 Sets LSR Injection Machines.
4. Test Equipment: 3D Projectors, Sealing Testor, Elasticity Measurement, Durometer etc.
5. Dustfree Environment: LSR injection Machines, 3 Sets Rubber Compressive Machines, and Assembly Line in 100,000 rating Dust-free Plants.
Contact us if you need more details on LSR Mask. We are ready to answer your questions on packaging, logistics, certification or any other aspects about LSR Laryngeal Mask、Medical Laryngeal Mask. If these products fail to match your need, please contact us and we would like to provide relevant information.
Product Categories : LSR Injection Parts