Find Conductive Silicone Gasket, Conductive Silicone Seal, Conductive Silicone Washer on Industry Directory, Reliable Manufacturer/Supplier/Factory from China.

Inquiry Basket (0)
Home > Products > Conductive Rubber > Conductive Silicone Gasket

Conductive Silicone Gasket

Payment Type: T/T, Western Union, Paypal
Min. Order: 10000

Basic Info

Model No.:  LD-16

Product Description

Model NO.: LD-16 Application: Electric Performance: Wear Standard: Standard Specification: CE, IGS, ROTHS HS Code: 3926901000 Material: SIL Type: Stationary Seal Shape: O-Ring Trademark: better Origin: Xiamen, China Conductive Silicone Gasket

    Conductive Silicone Gasket refers to any rubberized material O Ring with conductive properties, such as glass silvering, silver-plat aluminum, silver, etc. These kind of conductive particle are well-dispersed in the silicone rubber. Conductive network forms when the neighboring conductive particles contact under pressure. It reduces or eliminates the EMI/RFI (electromagnetic interference and radio frequency interference) noise that is often associated with electronics. Conductive Silicone includes following several major types:

CONSIL-NC (graphite nickel plating filled in silicone rubber)
CONSIL-V (silver filling silicone rubber extrusion padding)
CONSIL-A silicone rubber (aluminum silver)
CONSIL-N (nickel plated silver filled in silicone rubber)
CONSIL-C silicone rubber (copper plating silver)
SC-CONSIL (graphite filled in silicone rubber)
CONSIL-R silicone rubber (fine silver)
CONSIL-II (silver filled in silicone rubber molded gasket)
Conductive Silicone Gasket
Conductive Silicon Gasket Feature
   
     Conductive silicone Gasket main function is to seal and electromagnetic shield.  

Notes:             
     Conductive Silica Gel Gasket has electromagnetic shielding function, when the volume resistance is less than 10 ohm.cm. Mainly applied in electromagnetic shielding occasion, also used in the chassis, cabinets, shelter electronic and microwave waveguide system, connector pad, etc.
      Conductive Silicon Gel Gasket:The lower the resistance, the higher the hardness. When the resistance is below 10ohm.cm, the hardness is over 70 shore A.

Conductive Silicone Gasket
Conductive Silicone Gasket Applications

    Conductive silicone gasket often refers to o ring in rubber material, whose volume resistance is within 10^9 ohm.cm. Conductive Rubber can provide a good electrical conductivity (Inhibition of frequency 40 GHZ) with its good electromagnetic sealing and water vapor sealing ability. Its volume resistivity can be 0.004 ohm. cm, with good stability.  

      Conductive silicon Gasket  is used in both military and commerce. Main function is to seal and electromagnetic shield. Products can adopt compression molding or extrusion molding. It is on chip or Other cutting shape. Shielding performance is as high as 120 dB (10 GHz). Conductive silicon gel gasket is also used in medical electrode. Volume resistance of conductive rubber is bigger compared with that of metal, based on volume resistance is proportional to the distance, the longer the distance, the greater the resistance. Conductive silicone gasket has been widely used on the medical electrode. Electrode is thinner, generally below 1 mm, conductive rubber is completely electrified in this case. 

Conductive Silicone Gasket Main Principles

    Conductive particles filled inside the conductive silicon gasket reach a certain volume number, and contact one another, finally form electron continuous state. When strong electromagnetic wave in external electromagnetic field hits free electrons in conductive particles, forming an opposite electromagnetic field, internal and external electromagnetic field offset each other to weaken the effect of electromagnetic interference wave.

     Determining the right filler is dependent on the level of shielding needed for a specific application, the more conductive the filler the higher the level of shielding achieved.

       Conductive silastic Gasket another principle is energy transformation, in other word, law of conservation of energy. When electromagnetic wave hits free electrons, conductive particles generate heat in the process of electrons movement, which is electromagnetic interference wave - free electron movement kinetic energy-thermal energy, in order to weaken the electromagnetic interference.

Conductive Silicone Gasket Structure

    Conductive Silicone Gasket must be subject to certain compression force to good electrical conductivity, Therefore, the structure must be designed to ensure proper pressure. Optimal amount of compression plates is in height from 7 to 15% ; solid round , D -shaped highly compressed optimum amount of 12 to 30% ; tubular , P-shaped highly compressed form optimum amount of 20 to 60%.

Conductive Silicone Gasket Material Choice

    When working with conductive silicon gasket, it's important to remember that galvanic compatibility will also have an effect on which wire type or filler should be used. in this case, a conductive wire type or filler choice needs to be made where the difference in voltage potential between the dissimilar metals are as small as possible.        A widely popular form of conductive rubber is conductive silica gel gasket. In conductive silicone gasket  the base rubber is usually comprised of compounds such as silicone, fluorosilicone, or EPDM (ethylene propylene diene monomer). For example, silicone is used for general weather sealing and high temperatures to 400 deg. Fluorosilicone is used for applications where exposure to jet fuel, gasoline, and alcohols are present. EPDM is used for applications where exposure to coolants, steam, phosphate ester.
    After choosing a specific rubber suited for the intended environment, a conductive filler must be determined. Some of the most common conductive metal fillers used are silver aluminum, silver glass, silver copper, and nickel graphite.
  Conductive Silicone Gasket
Our Advantages:

1. Competitive Price: Original Manufacturer
2. Own Mold Tools Plants: 1.) Short time finished samples and products
                                         2.) Precision mold-making technology since 1998
3. Production Experience: Focus on and began to produce silicone/rubber Shower Head Gasket /Nozzle for many customers like Nikles since 2003.
4. Dust-free Production Environment: Silicone Rubber Plant and LSR Injection
 Plant.
5. Test Aid Equipment: projector, sclerometer etc. 

 OEM/ODM Service: Quick quotation demands
 
1. Offer 2/3 D design Drawings 2. Design and Size Demands
3. Hardness Demands 4. Hardness Tolerance Demands
5. Production Environment Demands 6. Materials Demands
7. Certification Demands (ASTM, DIN,
 JIS, ISO and SGS etc)
8. Production Environment Demand

Contact us if you need more details on Conductive Silicone Gasket. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Conductive Silicone Seal、Conductive Silicone Washer. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Conductive Rubber

Email to this supplier
  • *Subject:
  • To:

  • *Messages:
    Your message must be between 20-8000 characters